Measurement Instruments
Electromagnetic Flowmeter
The sensor is used with matching display instruments for measuring liquids in closed pipelines that are non-corrosive
to stainless steel (ICr Ni Ti 2Cr13), A1203, and hard alloys, and contain no fibers or particulate impurities. When paired
18 9
with specialized display instruments, it enables quantitative control and over-range alarm functions.
The explosion-proof model (ExmllT6) can be used in hazardous environments.
The sensor is suitable for media with viscosity 1 0-6m2/s at operating temperature. For liquids with viscosity 10-6
m2/s, on-site calibration with actual fluid is required.
Ultrasonic Flowmeter
The ultrasonic flow meter adopts a two-wire (loop-powered) design, making it easier to integrate with systems while
offering excellent cost performance. Its dual-path sensor achieves ±0.5% measurement accuracy, making it an ideal
choice for measuring various conductive or non-conductive liquids.
Widely applied in process control, production measurement, and trade settlement, it has been extensively used in
water supply/drainage, metallurgy, chemical, energy, and heating industries.
Doppler Flowmeter
TEXTTEXTTEXTTEXT
Electromagnetic Radar Flowmeter
TEXTTEXTTEXTTEXT
Ultrasonic Radar Flowmeter
TEXTTEXTTEXTTEXT
Clamp-on Type Ultrasonic Flowmeter
Both the main unit and sensor are installed on the measurement pipeline with protection class IP68.
Clamp-on sensors are installed on the pipe surface. Different sensors are available for pipe diameters: DNI 5—DN6000.
Magnetic Level Gauge
Measurement Range:200mm-20,000mm
Power Supply: 24VDC
Accuracy: ± 1 Omm
Output: 4—20mA
Working Pressure: 9.5 MPa
Operating Temperature: <3500C
Protection Rating: IP65
Mounting: Top/Side mounted
Process Connection: DN25 (standard)
Media Density: >0.45g/cm3
Wetted Materials:304SS/ 316LSS, "P/ PTFE-lined
Media Compatibility: Liquids
(Customizable for corrosive media)
Radar Level Meter
Applications: Corrosive liquids, slurries & high-vapor
liquids, powders & ashes
Measuring Range: 150m
Process Connection: Flange
Media Temperature: -40—1200C
Process Pressure:Atmospheric Pressure
Accuracy: ±2mm
Frequency: 120GHZ
Protection: IP67
Explosion-proof: Exd IIC T4 Gb
Output: 4—20mA/HART (two-wire/four-wire)
RS485/Modbus
Ultrasonic Level Meter
Application: General liquid level measurement
across industries, especially for water treatment.
Process connection: M66x2 / Bracket / Flange
Probe Material: ABS (open type)
Process Temp.:
Process Pressure:(-0.02—0.1 )
MPaAccuracy: FS
Output: 4—20mA
Power Supply:-2-wire: 24V DC
-4-wire: 24V DC / 220V AC
Explosion-proof Rating: Exd IIC T4 Gb
Radar Water Level Meter
TEXTTEXTTEXTTEXT
Temperature Transmitter
TEXTTEXTTEXTTEXT
Diaphragm Pressure Transmitter
TEXTTEXTTEXTTEXT
Differential Pressure Transmitter
Measuring Range:-0.1 MPa—60MPa
Power Supply: 12- 36VD
Accuracy: 0.075% F.S
Long-term Stability: ±0.1% F.S./year
Output Signal: 4—20mA with HART@ protocol
Response Frequency: 500Hz
Overoad Pressure: 200%F.S
Operating OOOC
Protection Level: IP65
Process Connection: Threaded Connection
Compatible Media: Gas, Liquid
(Customizable for corrosive media)
Double Flange Differential Pressure Transmitter
TEXTTEXTTEXTTEXT
Single Flange Side-Mounted Pressure Transmitter
TEXTTEXTTEXTTEXT